Labnics Microbial Air Sampler NMAS-300 provides 100 L/min sampling flow with a 1–9999 L sampling volume and seven selectable sampling modes. This portable microbial air sampler supports programmable sampling with 50,000-record data storage and temperature, humidity, and atmospheric pressure measurement. Its multi-aperture sampling head supports microbial air collection with Petri dishes.
$6,075.00
| Sampling Flow Rate | 100 L/min |
| Sampling Volume | 1 to 9999 L |
| Resolution Flow | 0.1 L/min |
| Resolution Volume | 1 L |
| Error | ±2.5% |
| Sampling Time | 0 to 23h59m59s, 8 preset delay times |
| Sampling Delay | 0 to 999 times, preset 8 sampling cycles |
| Sampling Interval | 0 to 23h59m59s, with preset 8 intervals |
| Sampling Mode | 7 modes, 8 sites, and 8 parameters |
| Petri Dish Size | Φ90 to 100 mm |
| Data Storage | 50,000 |
| Battery | 3.5 h, battery life ≥8 h |
| Power | Input AC100 to 240V 50 to60 Hz Output DC24V 2A |
| Noise | < 60 dB (A) |
| Power Consumption | < 10 W |
| Compressed Gas Sampling Kit | 0 to 6000L/min adjustable |
| Pressure Range | 0 to 10 Mpa |
| Compressed Gas Error | ±4% |
| Operating Temperature | 0 to 65 °C |
| Dimension | 125×127×217 mm |
| Compressed Gas Weight | < 1 kg |
| Weight | 1.9 kg (with sampling head) |
Flow Control — Regulated sampling flow
Data Integrity — Secure recorded measurements
Temperature Sensors — Ambient temperature monitoring
Humidity Monitoring — Relative humidity measurement
Atmospheric Pressure Sensors — Pressure measurement
Long Battery Life — Extended sampling operation
Quick Charge — Reduced charging time
High Storage Capacity — Large data record storage
Pressure Valve — Controlled air pressure
Anodized Aluminum — Corrosion-resistant housing
Alarm — Audible sampling alerts
4.3-inch HD Touch Screen — Clear parameter control
USB Data Output — Direct data transfer
Bluetooth Connectivity — Short-range data communication
Wi-Fi Communication — Wireless data transfer
Pharmaceutical Industries | Food and Drug Industries | Healthcare Facilities | Environmental Monitoring Industries |
Monitors airborne microbes in sterile areas with WiFi connectivity and multi-mode sampling | Detects food and drug production contamination with temperature, humidity, and pressure sensors | Ensures hospital air quality monitoring with long battery life and quick charge | Captures airborne particles with single stage impactor and USB data export |
Labnics Microbial Air Sampler support controlled collection of airborne microorganisms with sampling quantities from 0.001 to 9.999 m³, adjustable sampling volumes from 0.01 to 9999 L, and flow rates up to 100 L/min. Portable configurations support microbiological air sampling and routine air quality monitoring. These air sampling devices facilitate microbial assessment and environmental monitoring across varied sampling requirements.
